全国服务热线: 18485540838

耐酒精自干烤漆面油墨

发布日期 :2022-03-28 12:32访问:1次发布IP:61.165.129.69编号:4210213
品牌:
欧莱斯
干燥时间:
表干5-10分钟,实干24小时
油墨性能:
具有光泽优、附着力佳、耐冲击、耐汽油、酒精、耐折叠等特点。添加专用硬化剂可增加附着力,提高硬度。
使用材料:
金属,玻璃,陶瓷,电镀,五金,不锈钢,铝合金,拉丝面板
分 类
特殊/专业印刷耗材
单 价
220.00元/公斤
最小起订量
1 公斤
供货总量
1000000 公斤
发货期限
自买家付款之日起 2 天内发货
有效期至
长期有效
咨询电话
021-59507952
手机
18485540838
Email
huangmi1996@qq.com
在线咨询
点击这里给我发消息
让卖家联系我
详细介绍

耐酒精自干烤漆面油墨

具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。 印刷:丝印移印均可。 表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。 稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。 测试方法(完全干燥后): 1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油; 2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色; 3、 耐磨:橡皮擦500g力水平来回擦500次。 使用方法: 1、使用前应充分搅拌,用后随时封闭; 2、搅拌时加开油水10-15%,稀释到印刷粘度; 3、网板塞网时可用洗网水清洗; 4、不得与其它类型油墨混合使用。 注意事项: 1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷; 2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可; 3、环境温度过高,将会影响油墨原有质量; 4、根据气候变化,请远离火源,阴暗环境下存放。 

Oles MPE Plating Ink

MPE plating strengthening series ink characteristics : mainly used in plating surface, enhanced surface, vacuum plating surface.PU surface.UV surface and other materials, with a high color, high color, high covering power, high stability, high alcohol and rub characteristics. Printing: screen printing can be. Surface drying and drying time: surface dry time natural volatile 5-10 minutes; work time within 24 hours. Dilution and cleaning: SV3 slow dry open water, UVK1 ( printing open water) can be simultaneously used 718 washing network water cleaning. Test method ( completely dry ): 1, 3M gummed paper in the paintings of the surface of the ink, 45 degree angle quickly pulled off the oil; 2, 99% of the purity of industrial alcohol, one kilogram of weight of cotton pack in the ink surface, with a horizontal force pulling back and forth 200 times without decolorization; 3: oak, wear resistance eraser 500g force level brush back and forth 500 times. Usage: 1, use should be fully stirred, use at any time after the closure; 2, add water mixing 10-15%, diluted to 3, screen printing viscosity; the plug is available when washing network water cleaning; 4, not with other types of ink mixing. Note: 1, the plastic material similar in appearance, but may be of different materials, customers need to try to determine its requirements, and then batch printing; 2, in the printing process, such as drawing or spread out, may be appropriate to add some slow dry plaster; 3, the ambient temperature is too high, will affect the quality of the original ink; 4, according to climate change, please stay away from fir


相关产品
主营产品:自干烤漆面油墨
 
相关分类
上海兆恬实业有限公司
  • 地址:上海化学工业区物流产业园合展路118号1幢202室E座
  • 电话:021-59507952
  • 邮件:zhao445850506@qq.com
  • 手机:18485540838
  • 传真:021-59507952
  • 联系人:赵先生
推荐产品
信息搜索
 
免处理油墨产品